SharkBite 25558LFA Dual Compression Outlet Angle Stop Valve, 1/2 inch x 3/8 inch x 3/8 inch Plumbing Fitting, Quarter Turn, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT

Reliance Worldwide Corporation 25558LF - Performance: rated to 200 psi and 200 Degree F. Done. The sharkbite connection System makes any plumbing project fast and easy with our unique push-to-connect technology. Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces.

When you insert a pipe into the sharkbite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. Residential and commercial: all sharkbite fittings meet the same standards for commercial and residential plumbing applications.

SharkBite 25558LFA Dual Compression Outlet Angle Stop Valve, 1/2 inch x 3/8 inch x 3/8 inch Plumbing Fitting, Quarter Turn, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT - Sharkbite is the only push-to-connect brand that can ensure a clean, leak-free connection. Just push to create a watertight seal. The angle stop valve is used where the water pipe enters the room to allow for easy water shut-off of to the end fixture allowing for maintenance and repair without having to turn water off to your entire home.

Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results. Installs in seconds: dual outlet compression SharkBite valve requires no special tools, no soldering, no crimping or glue. Sharkbite push connect fittings are the no fuss way to fix small leaks or plumb a whole house.

Use in potable water and Hydronic Heating applications. Dual compression angle stopthe sharkbite double stop angle supply valve controls water flow to household plumbing fixtures and allows two 3/8” outlet supply lines to be attached to a single supply valve.

More information about Reliance Worldwide Corporation 25558LF

SharkBite 23036LFA4 Angle Stop, 1/2 inch x 3/8 inch, Compression Fitting, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT, Pack of 4

Reliance Worldwide Corporation 23036LFA4 - Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results. Installs in seconds: 1/2 inch push-fit x 3/8 inch threaded Compression Angle shut off valve requires no special tools, no soldering, no crimping or glue. Push. Just push to create a watertight seal.

Chrome plated valve for an attractive appearance. Copper, pex, pe-rt: sharkbite hose connector inlet fits Copper, cpvc, pex, CPVC and pe-rt pipe and connects them in any combination. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Use in potable water and hydronic heating applications.

SharkBite 23036LFA4 Angle Stop, 1/2 inch x 3/8 inch, Compression Fitting, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT, Pack of 4 - Sharkbite is the only push-to-connect brand that can ensure a clean, leak-free connection. Used where a water pipe enters a room allowing easy water shut off for maintenance, repair, installing a toilet pipe valve or faucet to your water system with no need to turn off your main supply valve. Cut. 4 pack of sharkbite1/2" x 3/8" compression angle stop valvewe use high-quality DZR Lead-Free Brass for our 1/2” x 3/8” Quarter Turn Angle Stop Ball Valve.

Residential and commercial: all SharkBite fittings meet the same standards for commercial and residential Plumbing applications. Done.

More information about Reliance Worldwide Corporation 23036LFA4


Similar products



SharkBite Deburring Pipe and Depth Gauge Tool, Copper, CPVC, Pipe, 1/4 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 1 inch, U702A

Cash Acme U702A - The mark is used to confirm that the fitting is seated correctly to ensure a watertight connection. Performance: rated to 200 psi and 200 degree F. Sharkbite is the only push-to-connect brand that can ensure a clean, leak-free connection. Residential and commercial: all SharkBite fittings meet the same standards for commercial and residential Plumbing applications.

Push. Copper, pex, cpvc, pe-rt: sharkbite hose connector inlet fits Copper, pex, CPVC and pe-rt pipe and connects them in any combination. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Cut. Sharkbite deburr & depth gauge tool our 2-in-1 tool is designed to simplify your plumbing project when using copper or CPVC tubing.

SharkBite Deburring Pipe and Depth Gauge Tool, Copper, CPVC, Pipe, 1/4 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 1 inch, U702A - Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results. Just push to create a watertight seal. Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces.

No soldering, clamps, glue required. Perfect for joining copper, pex, cpvc or pe-RT pipe, SharkBite is the no-fuss way to fix small leaks or plumb a whole house. Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection.

More information about Cash Acme U702A


Similar products



10-Pack PROCURU 1/2-Inch CTS Escutcheon Flange Plate Pipe Cover, Chrome-Plated Steel with SureGrip, for 1/2" Copper Pipe

PROCURU - For 1/2" cts nominal copper Pipe 5/8" OD. Certified: sharkbite fittings are certified to 200 PSI and 200°F and can be reused up to four times. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Each pack contains 10 pieces. Manufactured at the isO approved facilities, each fitting is rigorously tested and engineered for maximum durability and performance.

Copper, pex, pex, cpvc, pe-rt: sharkbite hose connector inlet fits Copper, CPVC and pe-rt pipe and connects them in any combination. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Use: 1/4 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch and 1 inch copper or CPVC Pipe.

10-Pack PROCURU 1/2-Inch CTS Escutcheon Flange Plate Pipe Cover, Chrome-Plated Steel with SureGrip, for 1/2" Copper Pipe - Compatible product: Same as part number U702 and U702Z. Suregrip fingers allow small adjustements to pipe for snug fit. Procuru is the brand of choice for plumbing professionals. For concealing gaps around water supply pipe. Installs in seconds: 1/2 inch push-fit x 3/8 inch threaded Compression Angle shut off valve requires no special tools, no soldering, no crimping or glue.

Just push to create a watertight seal. Each pack contains 10 pcs.

More information about PROCURU


Similar products



SharkBite 1/2-Inch Tee, 1/2 Inch, Push-to-Connect, PEX, Copper, CPVC

Cash Acme U362LFA - With no soldering, or glue required, clamps, connections are as simple as inserting a pipe into the fitting deep enough to be sealed by the specially-designed O-ring. Installs in seconds: 1/2-inch tee pipe connector requires no soldering, crimping, or glue--just push to create a watertight seal. Each pack contains 10 pcs.

Residential and commercial: all SharkBite fittings meet the same standards for commercial and residential Plumbing applications. Use: 1/4 inch, 5/8 inch, 3/8 inch, 1/2 inch, 3/4 inch and 1 inch copper or CPVC Pipe. Compatible product: Same as part number U702 and U702Z. This plumbing fitting joins copper, HDPE, CPVC, PEX, or PE-RT pipe in any combination.

Copper, pe-rt: sharkbite hose connector inlet fits Copper, cpvc, pex, pex, CPVC and pe-rt pipe and connects them in any combination. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. The sharkbite tee is designed for potable water and radiant heating applications including underground or behind-the-wall applications with no access panels required.

SharkBite 1/2-Inch Tee, 1/2 Inch, Push-to-Connect, PEX, Copper, CPVC - Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Trusted by plumbing professionals, and PEX pipe, water control valves, SharkBite manufactures a wide range of plumbing fittings, making it the only total plumbing solution from meter to fixture. Quality: sharkbite quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.

More information about Cash Acme U362LFA


Similar products



Faucet, Toilet Supply Shut-Off - PROCURU PushFit Angle Stop Valve 1/2" Nom x 3/8" OD Compression, Quarter-Turn ON/Off for Bathroom Fixtures - Lead Free Certified 10-Pack

PROCURU - Versatile: fits pex, copper, pe-RT, hdpe, cpvc, and CTS pipe and connects them in any combination. Compatability: same as part numbers U362LFZ and U362LF. Just push to create a watertight seal. For concealing gaps around water supply pipe. Chrome-plated steel construction. Installs in seconds: 1/2 inch push-fit x 3/8 inch threaded Compression Angle shut off valve requires no special tools, no soldering, no crimping or glue.

. Installs in seconds: 1/2-inch tee pipe connector requires no soldering, crimping, or glue--just push to create a watertight seal. Use in potable water and hydronic heating applications. Quality: sharkbite quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.

Faucet, Toilet Supply Shut-Off - PROCURU PushFit Angle Stop Valve 1/2" Nom x 3/8" OD Compression, Quarter-Turn ON/Off for Bathroom Fixtures - Lead Free Certified 10-Pack - Fast & easy installation: no need for installation tools, glue, or soldering! Simply push-to-connect pipe made of Copper, PEX, torch, CPVC. Features: quarter-turn oN/OFF, Heavy duty solid grade brass, Chrome plated. Certified: sharkbite fittings are certified to 200 PSI and 200°F and can be reused up to four times.

Pushfit inlet: 1/2" nominal 5/8" od for 1/2" pipe; OUTLET: 3/8" OD Compression for faucet/toilet supply connector. For 1/2" cts nominal copper Pipe 5/8" OD. Use: 1/4 inch, 3/8 inch, 5/8 inch, 1/2 inch, 3/4 inch and 1 inch copper or CPVC Pipe.

More information about PROCURU


Similar products



SharkBite U711 1/2 inch Disconnect Tongs, 1/2-Inch

SharkBite U711 - When you insert a pipe into the sharkbite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. Once inserted, the stainless steel teeth bite down and grip the pipe. Use in potable water and hydronic heating applications.

Certified: sharkbite fittings are certified to 200 PSI and 200°F and can be reused up to four times. Easy to use and very fast to Disconnect with this tool. For concealing gaps around water supply pipe. Just push to create a watertight seal. Connect pipe in seconds with relative ease using any SharkBite Push-To-Connect fitting.

Fast & easy installation: no need for installation tools, or soldering! Simply push-to-connect pipe made of Copper, PEX, torch, glue, CPVC. Features: quarter-turn oN/OFF, Heavy duty solid grade brass, Chrome plated. Quality: sharkbite quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.

SharkBite U711 1/2 inch Disconnect Tongs, 1/2-Inch - Performance: rated to 200 psi and 200 degree F. With no soldering, clamps, glue required, it's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially-formulated O-ring. Residential and commercial: all SharkBite fittings meet the same standards for commercial and residential Plumbing applications.

More information about SharkBite U711


Similar products



SharkBite 23336-0000LF Shut Off Water Valve, 1/2" x 1/4", Angle

Jensen 23336-0000LF - Use in potable water and hydronic heating applications. Performance: rated to 200 psi and 200 degree F. Copper, pex, cpvc, pex, pe-rt: sharkbite hose connector inlet fits Copper, CPVC and pe-rt pipe and connects them in any combination. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections.

Allows for easy removal of Universal brass push-to-connect fitting from pipe. Installs in seconds: 1/2 inch push-fit x 3/8 inch threaded compression angle shut off valve requires no special tools, no soldering, no crimping or glue. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections.

SharkBite 23336-0000LF Shut Off Water Valve, 1/2" x 1/4", Angle - Chrome-plated steel construction. Sharkbite is the only push-to-connect brand that can ensure a clean, leak-free connection. Residential and commercial: all SharkBite fittings meet the same standards for commercial and residential Plumbing applications. Certifications & compliance: upc, ANSI, NSF, Lead Free Act; Safe for drinking water.

What's included: pushFit Angle Stop Valve, Quantity of 10 . Cut. Simple: for depth insert the pipe into the gauge and mark the desired depth, then, rotate the tool around the pipe to remove burrs to achieve a clean edge and ensure a watertight seal.

More information about Jensen 23336-0000LF


Similar products



SharkBite 24983A Service Tee Stop Valve, 1/2 inch x 1/2 inch x 1/4 inch, Quarter Turn, Compression Service Stop Fitting, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT

StandardPlumbing: Kohler 24983A - Cut. Performance: rated to 200 psi and 200 degree F. Pushfit inlet: 1/2" nominal 5/8" od for 1/2" pipe; OUTLET: 3/8" OD Compression for faucet/toilet supply connector. Use in potable water and Hydronic Heating applications. Sharkbite is the only push-to-connect brand that can ensure a clean, leak-free connection.

Residential and commercial: all SharkBite fittings meet the same standards for commercial and residential Plumbing applications. Sharkbite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Just push to create a watertight seal. Certifications & compliance: upc, NSF, ANSI, Lead Free Act; Safe for drinking water.

What's included: pushFit Angle Stop Valve, Quantity of 10 Just push to create a watertight seal. Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. Simple: for depth insert the pipe into the gauge and mark the desired depth, then, rotate the tool around the pipe to remove burrs to achieve a clean edge and ensure a watertight seal.

SharkBite 24983A Service Tee Stop Valve, 1/2 inch x 1/2 inch x 1/4 inch, Quarter Turn, Compression Service Stop Fitting, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT - Trusted by plumbing professionals, water control valves and PEX pipe, SharkBite manufactures a wide range of plumbing fittings, making it the only total plumbing solution from meter to fixture. Suregrip fingers allow small adjustements to pipe for snug fit. Fast & easy installation: no need for installation tools, or soldering! Simply push-to-connect pipe made of Copper, glue, PEX, torch, CPVC.

More information about StandardPlumbing: Kohler 24983A


Similar products



Sharkbite 25032A Ice Maker Outlet Box, 1/2 inch x 1/4 inch Compression, Push-to-Connect Copper, PEX, CPVC, PE-RT Pipe

SharkBite 25032 - Each pack contains 10 pcs. Copper, pex, pex, pe-rt: sharkbite hose connector inlet fits Copper, CPVC, CPVC and PE-RT Pipe and connects them in any combination. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections.

Residential and commercial: all sharkbite fittings meet the same standards for commercial and residential plumbing applications. Installs in seconds: 1/2 inch push-fit x 3/8 inch threaded Compression Angle shut off valve requires no special tools, no soldering, no crimping or glue. Certified: sharkbite fittings are certified to 200 PSI and 200°F.

Sharkbite 25032A Ice Maker Outlet Box, 1/2 inch x 1/4 inch Compression, Push-to-Connect Copper, PEX, CPVC, PE-RT Pipe - . The snap-on faceplate accommodates up to 3/4" drywall. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Copper, pex, cpvc, pex, pe-rt: sharkbite hose connector inlet fits Copper, CPVC and pe-rt pipe and connects them in any combination. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections.

Use in potable water and Hydronic Heating applications. Suregrip fingers allow small adjustements to pipe for snug fit. For concealing gaps around water supply pipe.

More information about SharkBite 25032


Similar products



SharkBite 1/2-Inch Straight Coupling, Push-to-Connect, PEX, Copper, CPVC

Cash Acme U008LF - Installs in seconds: 1/2 inch push-fit x 3/8 inch threaded Compression Angle shut off valve requires no special tools, no soldering, no crimping or glue. Fast & easy installation: no need for installation tools, PEX, torch, or soldering! Simply push-to-connect pipe made of Copper, glue, CPVC. Features: quarter-turn oN/OFF, Heavy duty solid grade brass, Chrome plated.

Sharkbite is the only push-to-connect brand that can ensure a clean, leak-free connection. Certified: sharkbite fittings are certified to 200 PSI and 200°F and can be reused up to four times. Use in potable water and Hydronic Heating applications. For concealing gaps around water supply pipe. Use: 1/4 inch, 5/8 inch, 3/8 inch, 1/2 inch, 3/4 inch and 1 inch copper or CPVC Pipe.

SharkBite 1/2-Inch Straight Coupling, Push-to-Connect, PEX, Copper, CPVC - Compatible product: Same as part number U702 and U702Z. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Allows for easy removal of Universal brass push-to-connect fitting from pipe. Suregrip fingers allow small adjustements to pipe for snug fit. Disassembly is just as easy with the simple SharkBite disconnect tool.

Use to remove Sharkbite Fittings.

More information about Cash Acme U008LF


Similar products