As an Amazon Associate I earn from qualifying purchases.

The intelligent temperature controls the speed at 1000~1800±10% rpm, so the fan speed can be controlled and keep the fans quiet. Dual light loop design - controlled by rgb remote controlleraddressable rgb leds can be controlled by rgb remote controller - 12 lighting modes, provide colorful streamer lighting effects.
Cpu cooler/computer Case/GPU etc. You also can turn on / off the fan light effect and switch fan hub’s RGB signal to motherboard 5V ARGB / 12V RGB port by remote. The rubber soft material which is not easy to peel off has good shock absorbing effect, which can make the internal operation of the computer case stably and reduce the noise output between the fan and the computer case. Lifetime 30, 000 Hrs. The maximum noise of the fan is only 31. 4dbA.

7 colors & 18 independent controlled leds: with dual ring, total 18 LEDs smoothed out the overall RGB effect and leaves no gaps between LEDs. Package included: individually non-adressable rgb 4pIN RGB Header, 12V Case Fan 120mm x 3 please do not connect our non-addressable RGB fan.



This is argb pwm 2-in-1 6 way hub. Both length of the wires is 53 cm. Gold-plated pins, solid materials, strong and durable. The red port on the hub is a professional port for the CPU fan.
Only compatible with 3pin 5v addressable rgb headers or controllers, and realize the effects of running water lamp, don't connect to 12V RGB components, otherwise it might burn out. The adhesive on the back can be used to fix the hub in the chassis, which effectively saves your space, and not easy to drop. The black hub is perfectly integrated with chassis. The pwm argb hub is equipped with two connecting cables.

There is eva double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Designed for 12v 4-pin 3-pin fans, support simultaneous starting at most 10 channel fans. You can connect to the CPU fan lead on the system board or the chassis fan lead.
Red is expected to be a pass through for the cpu fan. The ten fans will spin at the same speed, that designated by the system for that fan. If the chassis fan is configured in bios to run at 50%, the hub has a power source fed from the computer power supply, you will have 10 fans at 50%. For both 4-pin and 3-pin fans. Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.

Quiet operation: sleeve bearing and fluid dynamic bearing 21. 5 dba run quietly, meeting the noise standard of the studio. Bright rgb: full-spectrum rgb lighting, to meet the individual needs of most players, and you can enjoy a distinctive vision after powering on.

The signal numbers of 12v rgb and 5v argb of different motherboards will be slightly different. On some motherboards, few rgb mixed colors may not be displayed correctly such as orange, yellow, and the color of the LED does not change smoothly in cycle color mode.

Anti shock designthe anti shock design on both sides of the AR series PC case fans, reduce resonance and bring more silence, and be more quiet. The fan blade designthe fan blade design can lower the noise effective and bring more airflow.
1. 1 one enjoy
#ad
Thermalright RGB Fan Hub PC Case Fan Controller 4 Pin, Support 10 Computer CPU Fans Splitter RGB
#ad1 one enjoy #ad - This 12v rgb hub can connect any 4PIN RGB products simultaneously, while only taking up one header on your motherboard. Stable sata power input: simple and stable. 10-port fan hub: only support 4 pin.More information #ad
Connects up to 10 Fans at the same time. Compact design can save space and make the wire more tidy. Easy to install: double-sided adhesive for easy installation and more stable standing in the surface. Only one saTA connection to the system.Brand | 1 one enjoy #ad |
Manufacturer | 1 one enjoy #ad |
Part Number | FANHUB-RGB |
More information #ad
2. PCCOOLER
#ad
Dual Light Loop Quiet Fan/Multiple Light Modes with Wireless Controller for PC Case, Pccooler 120mm Fan Moonlight Series 5 in 1 Kit Upgrade,PC-5M120 ARGB LED Computer Case Fan, PWM Cooling Fan
#adPCCOOLER #ad - These fans are 4pin 5v arGB connector that connect with RGB control box one by one. Intelligent speed control5 pcs 120mm full function pwm fans. Wireless rgb controller, more advanced wireless control dimming technology than infrared, you can still switch the light mode without aligning the light source.The intelligent temperature controls the speed at 1000~1800±10% rpm, so the fan speed can be controlled and keep the fans quiet. Dual light loop design - controlled by rgb remote controlleraddressable rgb leds can be controlled by rgb remote controller - 12 lighting modes, provide colorful streamer lighting effects.
More information #ad
Please connect the fan ARGB connector with control box one by one. To avoid making reverse connector, please follow the silk mark instruction strictly when you insert the connector to the control box. Cpu cooler/computer Case/GPU etc. You also can turn on / off the fan light effect and switch fan hub’s RGB signal to motherboard 5V ARGB / 12V RGB port by remote. The rubber soft material which is not easy to peel off has good shock absorbing effect, which can make the internal operation of the computer case stably and reduce the noise output between the fan and the computer case. Lifetime 30, 000 Hrs. The maximum noise of the fan is only 31. 4dbA.
Brand | PCCOOLER #ad |
Manufacturer | PCCOOLER #ad |
Height | 0.98 Inches |
Length | 4.72 Inches |
Weight | 2.05 Pounds |
Width | 4.72 Inches |
Part Number | PC-5M120 |
Model | PC-5M120 |
More information #ad
3. Antec
#ad
RGB High Performance PC Fan, 4-Pin RGB, 120mm Case Fan, Spark Series, 3 Packs, Antec RGB Fans
#adAntec #ad - Do not connect non-addressable rgb fans into our addressable control hub. Extreme cooling performance - 45. 03 cfm & 2. 56 mm: pwm fan optimized heat dissipation and hydraulic bearing ensured ultra quiet operation.7 colors & 18 independent controlled leds: with dual ring, total 18 LEDs smoothed out the overall RGB effect and leaves no gaps between LEDs. Package included: individually non-adressable rgb 4pIN RGB Header, 12V Case Fan 120mm x 3 please do not connect our non-addressable RGB fan.
More information #ad
Convex designed non-addressable rgb double ring offered best lighting effect: convex design kept RGB lighting effect at a optimal point and left tolerance for other RGB components such as, mobo / ram / gpu, water cooling components, and SSD plate.Brand | Antec #ad |
Manufacturer | Antec #ad |
Height | 0.98 Inches |
Length | 4.72 Inches |
Width | 4.72 Inches |
Part Number | AMGSPARK |
More information #ad
4. DEEP COOL
#ad
Compatible with ASUS Aura Sync, DEEPCOOL RF120M 5IN1, Controlled by Motherboard with 12V 4-pin RGB Header, No Wired Controller, 5x120mm RGB PWM Fans with 2 Fan Hubs
#adDEEP COOL #ad - Air flow: 56. 5 cfm. Multiple control modes: breathing, static state, or multi-color cycling. Max. Rgb led connector: 4-pin +12V-G-R-B. Intelligent PWM functions to meet system cooling demands. Support up to 6pcs of deepcool rgb devices, rgb 200EX, captain ex rgb, including: GAMMAXX GT/GT BK, and so on.More information #ad
No cable controller. Rgb plugs of these fans can be daisy chained and the last one can be plugged into motherboard 12V 4-pin RGB header. Fan speed: 500~1500 rpm±10%. Noise: ≤27 dba. Fan connector: 4-pin PWM.Brand | DEEP COOL #ad |
Manufacturer | DEEPCOOL #ad |
Height | 0.98 Inches |
Length | 4.72 Inches |
Weight | 1.76 Pounds |
Width | 4.72 Inches |
Part Number | RF120M |
Model | RF120M |
More information #ad
5. DS leddess
#ad
SATA Power Cable, 4th Gen, A D E Series, DS Rainbow RGB Fan LED Sync Controller only for DS Fans with 21key RF Remote
#adDS leddess #ad - Risk-free purchase experience: If you have any questions, please contact us, DS LEDdess will reply within 24 hours. 21 key rf remote, multiple Modes, Can Adjust Fan Speed.More information #ad
Ds hub box can sync up color to 9 x Fans and 2 x LED Strip Light. Fan connector of 6 pin, led strip connector of 4 Pin, for DS Fans. For only use with addressable led fans and LED Strip for DS A/D/E Series Fans.Brand | DS leddess #ad |
Manufacturer | DS leddess #ad |
Height | 2.95 Inches |
Length | 2.95 Inches |
Width | 0.59 Inches |
Part Number | DS-ADE03-B |
Model | DS-ADE03-B |
More information #ad
6. XMSJSIY
#ad
12V 4Pin PWM & 5V 3Pin ARGB with SATA 15Pin Power 2-in-1 Hub 6 Way Sync CPU Cooling Fan Addressable RGB Lighting PCB Splitter for Extended Motherboard Interface -Black
#adXMSJSIY #ad - Up to 6 sets of addressable rgb 5v 3pin plugs and pwm 12v 4pin plugs to meet your needs of connecting more devices. This type of fan can control a single lamp bead, splicing and displaying text patterns through programming. This cpu cooling sata hub is powered by sata 15pin, which can simultaneously supply power to the fan and 5V 3 pin ARGB products.This is argb pwm 2-in-1 6 way hub. Both length of the wires is 53 cm. Gold-plated pins, solid materials, strong and durable. The red port on the hub is a professional port for the CPU fan.
More information #ad
Mini and compact, tool-free installation, makes cable management easier, and the inside of the chassis is tidy. The motherboard has no power supply burden and can maintain a stable output even at full load. Support simultaneous startup of 6 way fans, ARGB is all synced between all fans, one setting applies to all fans speed and color. Only compatible with 3pin 5v addressable rgb headers or controllers, and realize the effects of running water lamp, don't connect to 12V RGB components, otherwise it might burn out. The adhesive on the back can be used to fix the hub in the chassis, which effectively saves your space, and not easy to drop. The black hub is perfectly integrated with chassis. The pwm argb hub is equipped with two connecting cables.
Brand | XMSJSIY #ad |
Manufacturer | sisselyan #ad |
Part Number | 200820 |
Model | 200820 |
More information #ad
7. ELECTOP
#ad
Electop PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller
#adELECTOP #ad - Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis. In the hub interfaces, the red cpu interface is the cpu fan dedicated interface with speed detection function.There is eva double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Designed for 12v 4-pin 3-pin fans, support simultaneous starting at most 10 channel fans. You can connect to the CPU fan lead on the system board or the chassis fan lead.
More information #ad
Please note 4pin fan speed can be adjusted by temperature control. 3pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting. So, then the speed is regulated by the speed for the "source" fan. Red is expected to be a pass through for the cpu fan. The ten fans will spin at the same speed, that designated by the system for that fan. If the chassis fan is configured in bios to run at 50%, the hub has a power source fed from the computer power supply, you will have 10 fans at 50%. For both 4-pin and 3-pin fans. Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.
Brand | ELECTOP #ad |
Manufacturer | Electop #ad |
Part Number | CPUCOOL-1-10-4P |
Model | 4328444952 |
More information #ad
8. Antec
#ad
4-PIN RGB, PC Fan, F12 Series, Antec 120mm Case Fan, RGB Case Fans
#adAntec #ad - Rapid cooling: the arc surface of the fan frame is guided, efficient ventilation, which can produce good airflow and cooling effect, and large-capacity heat dissipation.Quiet operation: sleeve bearing and fluid dynamic bearing 21. 5 dba run quietly, meeting the noise standard of the studio. Bright rgb: full-spectrum rgb lighting, to meet the individual needs of most players, and you can enjoy a distinctive vision after powering on.
More information #ad
Trusted premium brand : 18-month manufacturer's warranty and Professional Customer Service Assistance. Easy to install: 12v rgb interface connected by daisy chain to reduce the difficulty of cable management PLEASE confirm whether the motherboard has 4pin rgb interface.Brand | Antec #ad |
Manufacturer | Antec #ad |
Height | 0.98 Inches |
Length | 4.72 Inches |
Width | 4.72 Inches |
Part Number | F12 |
Model | F12 RGB LED |
More information #ad
9. EZDIY-FAB
#ad
EZDIY-FAB RGB Converter, Built-in 50 Color Modes, Motherboard with 12V 4-pin Header can Control 5V ADD-RGB Products, 12V RGB to 5V ARGB Transfer Hub with 3-Way Splitter
#adEZDIY-FAB #ad - Included 3-way splitter, could extension with more ARGB devices. Mini control box with built-in 50 color modes, or Holding mode button to sync with 12V RGB Motherboard.The signal numbers of 12v rgb and 5v argb of different motherboards will be slightly different. On some motherboards, few rgb mixed colors may not be displayed correctly such as orange, yellow, and the color of the LED does not change smoothly in cycle color mode.
More information #ad
Only could sync with 12v rgb motherboard. The signal codes of 12v rgb and 5v argb of different motherboards will be slightly different. On some motherboards, some rgb mixed colors may not be displayed correctly such as orange, yellow, and the color of the LED does not change smoothly in cycle color mode. Voltage transformer from 12 to 5V, powered by SATA.Brand | EZDIY-FAB #ad |
Manufacturer | EZDIY-FAB #ad |
Weight | 1.08 Pounds |
Part Number | US-12V to 5V Controller |
More information #ad
10. aigo
#ad
Aigo AR12 5-Pack 120mm RGB Case Fan ARGB Addressable Motherboard SYNC Cooling SATA Interface PC Fans with Controller for Computer Case
#adaigo #ad - Power connectorthe ar12 fans connect with micro 6 pin, and requires an aigo micro 6 pin controller to run. Ar12 case fans controller use the latest SATA cable, connect the SATA interface on the power supply.Anti shock designthe anti shock design on both sides of the AR series PC case fans, reduce resonance and bring more silence, and be more quiet. The fan blade designthe fan blade design can lower the noise effective and bring more airflow.
More information #ad
5v argb addressable rgbif your motherboard has RGB function, our fans could synchronize the lights of the motherboard completely!Make you enjoy the high consistency of lighting. Comfortable lighting effectthe tpu light guidance ring is a perfect match with the frame of the fans, the fan is also creative in design and qualified in material.Brand | aigo #ad |
Manufacturer | aigo #ad |
Height | 0.98 Inches |
Length | 4.72 Inches |
Weight | 1.59 Pounds |
Width | 4.72 Inches |
Part Number | AR12 5in1 |
Model | AR12 |
More information #ad