Top 10 CP2102 ESP8266 ESP-12E – Computer Networking Transceivers

As an Amazon Associate I earn from qualifying purchases.

1. HiLetgo

#ad

HiLetgo 1PC ESP8266 NodeMCU CP2102 ESP-12E Development Board Open Source Serial Module Works Great for Arduino IDE/Micropython Small

#ad
HiLetgo #ad - Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython. Built-in micro-usb, with flash and reset switches, easy to program. Esp8266 cp2102 nodemcu lua esp-12e wifi serial Wireless Module.
BrandHiLetgo #ad
ManufacturerHiLetgo #ad
Height1.57 Inches
Length1.57 Inches
Weight0.02 Pounds
Width1.57 Inches
Part Number3-01-0268-1
Model3-01-0268-1

2. KeeYees

#ad

KeeYees 3pcs ESP8266 ESP-12E Development Board WiFi WLAN Wireless Module CP2102 for NodeMCU for ESP-12E for Arduino

#ad
KeeYees #ad - The development board has integrating gpio, IIC, PWM, 1-Wire and ADC all in one board. The fast and affordable technology for WiFi. Modern, state-of-the-art lua technology.

It is an integrated unit with all available resources on board. The controllers are easy to program by using the CP2102-USB interface without having to press the flash and reset buttons before each flash operation. Make your development the fastest way combined with firmware for NodeMcu. It's very easy for arduino projects or any development board with I / O pins. Support smart link smart networking. Modern internet development tools can use the built-in API to instantly put your idea on the fast track.
BrandKeeYees #ad
ManufacturerKeeYees #ad
Part NumberNa
Model8541549622

3. Songhe

#ad

Songhe ESP8266 NodeMCU CP2102 ESP-12E 4M Bytes Internet of Things WiFi Development Board Serial Wireless Module for Arduino IDE Micropython 5PCS

#ad
Songhe #ad - Supporting three modes: ap, and AP+STA;upporting Lua program, STA, easily to develop. The controllers are easy to program by using the CP2102-USB interface without having to press the flash and reset buttons before each flash operation. The development board integrates GPIO, IIC, PWM, 1-Wire and ADC in one.
BrandSonghe #ad
ManufacturerSonghe #ad
Height0.51 Inches
Length1.9 Inches
Weight0.02 Pounds
Width1 Inches
Part NumberJ16
Modelesp8266 nodemcu lua

4. MELIFE

#ad

MELIFE CP2102 ESP-12E WiFi Internet Development Board Open Source Serial Wireless Module., 2Pcs ESP8266 NodeMCU

#ad
MELIFE #ad - Full i/o port and wireless 802. 11 supported, direct download no need to reset. Highly integrated chip designed, works great for IDE/Mongoose IoT/Micropython. Built-in micro-usb, with flash and reset switches, easy to program.
BrandMELIFE #ad
ManufacturerMELIFE #ad
Part Number15488

5. HiLetgo

#ad

HiLetgo 2pcs ESP8266 NodeMCU CP2102 ESP-12E Development Board Open Source Serial Module Pack of 2PCS

#ad
HiLetgo #ad - Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython. Esp8266 cp2102 nodemcu lua esp-12e wifi serial Wireless Module. Built-in micro-usb, with flash and reset switches, easy to program. Data download access to the website: http://www. Nodemcu. Com.
BrandHiLetgo #ad
ManufacturerHiLetgo #ad
Height0.51 Inches
Length5 Inches
Weight0.02 Pounds
Width3.74 Inches
Part Number3-01-0268
Model3-01-0268

6. DORHEA

#ad

10Pcs ESP8266 CP2102 ESP-12E NodeMcu LUA Internet WiFi Development Board Open Source Serial Internet Wireless Module for IDE Micropython

#ad
DORHEA #ad - Esp8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.

Support smart link smart networking. Modern internet development tools can use the built-in API to instantly put your idea on the fast track. Esp8266 nodemcu board has powerful on-board processing and storage capabilities, allows to be integrated with sensors and other specific applicated devices through its GPIOs. Full i/o port and Wireless 802. 11supported, direct download without resetting. The cp2102 esp-12e controllers are easy to program by using the cp2102-usB interface without having to press the flash and reset buttons before each flash operation.

The esp8266 development board has integrating gpio, iic, pwm, 1-wire and adc all in one board. Make your development the fastest way combined with firmware for NodeMcu. Perfectly compatible with the Micropython. It is an integrated unit with all available resources on board. The fast and affordable technology for WiFi.
BrandDORHEA #ad
ManufacturerDORHEA #ad
Part Number14638-1

7. Hosyond

#ad

Hosyond 3Pcs ESP8266 NodeMCU CP2102 ESP-12E Wireless WiFi Module Internet of Things Development Board Compatible with Arduino IDE/Micropython

#ad
Hosyond #ad - The esp8266 has powerful on-board processing and storage capabilities, and can be integrated with sensors and other application-specific devices through its GPIOs.

Modern internet development tools can use the built-in API to instantly put your idea on the fast track. Not only it is easy to program for this controller by using the CP2102-USB interface, but also unnecessary to press the flash and reset buttons before each flash operation. It is compatible with arduino IDE, works great with the latest Mongoose IoT/Micropython. Nodemcu is an open source lua based firmware for the ESP8266, development boards for rapid prototyping, ultra low cost wireless modules, integrated with ESP8266 chips.
BrandHosyond #ad
ManufacturerHosyond #ad
WarrantyNO

8. AITRIP

#ad

AITRIP 5 PCS ESP8266 NodeMCU CP2102 ESP-12E Internet WiFi Development Board Open Source Serial Wireless Module Works Great Compatible with Arduino IDE/Micropython 5PCS

#ad
AITRIP #ad - It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.

Compatible with arduino, works great with the latest Compatible with Arduino IDE/Mongoose IoT/Micropython. The chip model: cp2102; there is the way to guide you to use the new version: the command you needed to use is: esptool. Py --baud 115200 --port /dev/tty. Slab_usbtouart write_flash -fs 32m -ff 80m --flash_mode dio 0x00000 boot_v1. 7. Bin 0x1000 user1. Bin 0x37c000 esp_init_data_default. Bin 0x37e000 blank. Bin the important part is “—flash mode dio”. Esp8266 cp2102 nodemcu lua esp-12e wifi serial Wireless Module. Sp8266 is a highly integrated chip designed for the needs of a new connected world. 5pcs esp8266 cp2102 nodemcu lua esp-12e wifi Serial Wireless Module.
BrandAITRIP #ad
ManufacturerAITRIP #ad

9. KeeYees

#ad

KeeYees ESP8266 Breakout Board GPIO 1 into 2 for ESP8266 ESP-12E Development Board 2PCS

#ad
KeeYees #ad - For esp8266 esp-12e: specially designed by keeyees technical team. Just select them according to your purpose. One pin is wired on both sides. Gpio 1 into 2: this expansion board can expand one GPIO pin of Development Board to two, which is convenient for users to reuse pins for large-scale smart home projects.

Therefore, the circuit is stable and highly reliable, and there will be no poor circuit contact and unstable signal transmission. No need to solder parts by yourself, which is very convenient to use. Double-layer pcb: the expansion board is a double-layer board. 2 type connections: two connection methods: Pin Header Connector & Screw Terminal. Updated version: compared with the previous version, the board of this version has been soldered completely. It is fully compatible with ESP8266 ESP-12E.
BrandKeeYees #ad
ManufacturerKeeYees #ad
Part Number[email protected]

10. MakerFocus

#ad

MakerFocus 2pcs ESP8266 NodeMCU LUA CP2102 ESP-12E Internet WiFi Development Board Serial Wireless Module Internet for Ar duino IDE/Micropython with Free Adapter Board for ESP8266 ESP-01 and nRF24L01+

#ad
MakerFocus #ad - Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area. Esp8266 is a highly integrated chip designed for the needs of a new connected world.

The makerfocus nrf24l01+ and esp8266 esp-01 breadboard breakout adapter board is available free of charge and is compatible with the "nRF24L01+" and ESP8266 ESP-01. The chip model: CP2102. User manual: please get the link from the product description below. Esp8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime.

It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. If you need more information about it, get it in the documentation.
BrandMakerFocus #ad
ManufacturerMakerFocus #ad
Height0.2 Inches
Length1.9 Inches
Weight0.04 Pounds
Width0.9 Inches
Part NumberTXH162337KQKVJ378
Model4328612740